View file File name : epson.conf Content :# epson.conf # # here are some examples for how to configure the EPSON backend # # SCSI scanner: scsi EPSON # for the GT-6500: scsi "EPSON SC" # # Parallel port scanner: #pio 0x278 #pio 0x378 #pio 0x3BC # # USB scanner: # There are two different methods of configuring a USB scanner: libusb and the kernel module # For any system with libusb support (which is pretty much any recent Linux distribution) the # following line is sufficient. This however assumes that the connected scanner (or to be more # accurate, it's device ID) is known to the backend. usb # For libusb support for unknown scanners use the following command # usb <product ID> <device ID> # e.g.: # usb 0x4b8 0x110 # And for the scanner module, use the following configuration: #usb /dev/usbscanner0 #usb /dev/usb/scanner0