View file File name : saned.conf Content :# saned.conf # Configuration for the saned daemon ## Daemon options # Port range for the data connection. Choose a range inside [1024 - 65535]. # Avoid specifying too large a range, for performance reasons. # # ONLY use this if your saned server is sitting behind a firewall. If your # firewall is a Linux machine, we strongly recommend using the # Netfilter nf_conntrack_sane connection tracking module instead. # # data_portrange = 10000 - 10100 ## Access list # A list of host names, IP addresses or IP subnets (CIDR notation) that # are permitted to use local SANE devices. IPv6 addresses must be enclosed # in brackets, and should always be specified in their compressed form. # # The hostname matching is not case-sensitive. #scan-client.somedomain.firm #192.168.0.1 #192.168.0.1/29 #[2001:db8:185e::42:12] #[2001:db8:185e::42:12]/64 # NOTE: /etc/inetd.conf (or /etc/xinetd.conf) and # /etc/services must also be properly configured to start # the saned daemon as documented in saned(8), services(4) # and inetd.conf(4) (or xinetd.conf(5)).