View file File name : magicolor.conf Content :### magicolor.conf ### ### here are some examples for how to configure the Magicolor backend ### Timeout settings: SNMP autodetection, Scan data read requests and other ### read requests. All values are given in milliseconds, ### i.e. 1000 is 1 second. # SNMP auto-detection waits 1.5 seconds snmp-timeout 1500 # wait 15 seconds for scan data (color scans take ~6 seconds to initialize, # so we need to wait longer than that) scan-data-timeout 15000 # Wait 5 seconds for all other data requests request-timeout 5000 ### Network: Format is "net IP_ADDRESS [USB_ID]" or "net autodiscovery" ### if USB_ID is left out, SNMP is used to detect the device type net autodiscovery #net 10.0.0.5 ### The following is a magicolor 1690mf with explicit IP-Address #net 10.0.0.5 0x2098 # net 192.168.0.1 ### USB: format is "usb" for automatic (libusb) discovery, based on USB IDs, ### or "usb <vendor ID> <device ID> to force the use of a particular ### device (the backend has some additional checks and will not use ### non-KONICA MINOLTA devices, though) usb ### For libusb support for unknown scanners use the following command ### usb <product ID> <device ID> ### e.g.: # usb 0x132b 0x2098