View file File name : dc210.conf Content :# Serial port where the camera is connected ## Linux port=/dev/ttyS0 ## IRIX #port=/dev/ttyd1 ## Solaris #port=/dev/term/a ## HP-UX #port=/dev/tty0p0 ## Digital UNIX #port=/dev/tty01 # Max baud rate for download. Camera always starts at 9600 baud, then # switches to the higher rate ## This works for Linux. Also works for IRIX (6.3 or higher), providing that ## the host is an O2, OCTANE, Origin2000/200, Onyx2, Origin3000/300, Onyx3 or ## a newer SGI hardware [see serial(7)]. #baud=115200 ## This works for most UNIX's baud=38400 # Prints some extra information during the init phase. This can be # handy, but note that printing anything to stderr breaks the saned # network scanning. #dumpinquiry # How many usec (1,000,000ths of a) between writing the command and reading the # result. 125000 seems to be the lowest I could go reliably. cmdrespause=125000 # How many usec (1,000,000ths of a) between sending the "back to default" break # sending commands. breakpause=1000000;