View file File name : canon_pp.conf Content :# Define which port to use if one isn't specified - you should only have # one of these lines! # This is the default port to be used - others will be detected ieee1284 parport0 # Define the location of our pixel weight file, can begin with ~/ if needed. # You can have as many of these as you like - lines with ports that don't exist # will be ignored. # # Parameters are: # calibrate /path/to/calibration-file port-name # # The format of port-name is dependant on your OS version. # # If a file isn't speficied, the default name will be # ~/.sane/canon_pp-calibration-[port-name] calibrate ~/.sane/canon_pp-calibration-pp0 parport0 # calibrate /etc/sane/my_calibration parport1 # Enable the next line if you're having trouble with ECP mode such as I/O # errors. Nibble mode is slower, but more reliable. #force_nibble # Set a default initialisation mode for each port. Valid modes are: # AUTO (attempts to automatically detect by trying both methods) # FB620P (10101010 style.. also works for FB320P) # FB630P (11001100 style.. also works for FB330P, N340P, N640P) init_mode AUTO parport0 # init_mode FB620P parport0 # init_mode FB630P parport0