Edit file

File name : HP-Color_LaserJet_CM3530_MFP-PDF.ppd

Content :*PPD-Adobe: "4.3" *% *% This PPD file is for using the HP Color LaserJet CM3530 MFP in native *% PDF mode, using CUPS with the OpenPrinting CUPS Filters package *% *% This PPD is experimental. It is possible that some of the options *% and settings do not make sense or do not cause any change on the output. *% It can even happen that with certain settings nothing or an error page *% comes out. *% *% This file is published under the GNU General Public License *% *% You may save this file as 'HP-Color_LaserJet_CM3530_MFP-PDF.ppd' *% *% *FormatVersion: "4.3" *FileVersion: "1.1" *LanguageVersion: English *LanguageEncoding: ISOLatin1 *PCFileName: "CM353PDF.PPD" *Manufacturer: "HP" *Product: "(HP Color LaserJet CM3530 MFP)" *Product: "(Hewlett-Packard HP Color LaserJet CM3530 MFP)" *cupsVersion: 1.0 *cupsManualCopies: True *cupsModelNumber: 2 *ModelName: "HP Color LaserJet CM3530 MFP" *ShortNickName: "HP Color LaserJet CM3530 MFP" *NickName: "HP Color LaserJet CM3530 MFP PDF" *PSVersion: "(3010.107) 0" *LanguageLevel: "3" *ColorDevice: True *DefaultColorSpace: CMYK *FileSystem: False *Throughput: "30" *LandscapeOrientation: Plus90 *TTRasterizer: Type42 *1284DeviceID: "MFG:Hewlett-Packard;CMD:PJL,BIDI-ECP,PCLXL,PCL,PDF,PJL,POSTSCRIPT;MDL:HP Color LaserJet CM3530 MFP;CLS:PRINTER;DES:Hewlett-Packard Color LaserJet CM3530 MFP;DRV:DPDF,R0,M0;" *JCLBegin: "<1B>%-12345X@PJL JOB<0A>" *JCLToPDFInterpreter: "@PJL ENTER LANGUAGE = PDF <0A>" *JCLEnd: "<1B>%-12345X@PJL EOJ <0A><1B>%-12345X" *cupsFilter: "application/vnd.cups-pdf 0 -" *cupsFilter2: "application/pdf application/vnd.cups-pdf 0 pdftopdf" *OpenGroup: General/General *JCLOpenUI *PageSize/Page Size: PickOne *OrderDependency: 100 JCLSetup *PageSize *DefaultPageSize: Letter *PageSize Letter/Letter: "@PJL SET PAPER=LETTER<0A>" *PageSize A4/A4: "@PJL SET PAPER=A4<0A>" *PageSize A5/A5: "@PJL SET PAPER=A5<0A>" *PageSize A6/A6: "@PJL SET PAPER=A6<0A>" *PageSize ISOB5/ISO B5: "@PJL SET PAPER=B5<0A>" *PageSize EnvC5/C5: "@PJL SET PAPER=C5<0A>" *PageSize Env10/Com 10: "@PJL SET PAPER=COM10<0A>" *PageSize EnvDL/DL: "@PJL SET PAPER=DL<0A>" *PageSize 5x13/Eight Point 5x13: "@PJL SET PAPER=EIGHTPOINT5X13<0A>" *PageSize EnvC6/Envelope C6: "@PJL SET PAPER=ENVELOPEC6<0A>" *PageSize Executive/Executive: "@PJL SET PAPER=EXECUTIVE<0A>" *PageSize B5/JIS B5: "@PJL SET PAPER=JISB5<0A>" *PageSize B6/JIS B6: "@PJL SET PAPER=JISB6<0A>" *PageSize Legal/Legal: "@PJL SET PAPER=LEGAL<0A>" *PageSize EnvMonarch/Monarch: "@PJL SET PAPER=MONARCH<0A>" *PageSize 69x95mm/16K: "@PJL SET PAPER=SIZE16K195x270<0A>" *PageSize Statement/Statement: "@PJL SET PAPER=STATEMENT<0A>" *JCLCloseUI: *PageSize *JCLOpenUI *PageRegion: PickOne *OrderDependency: 100 JCLSetup *PageRegion *DefaultPageRegion: Letter *PageRegion Letter/Letter: "@PJL SET PAPER=LETTER<0A>" *PageRegion A4/A4: "@PJL SET PAPER=A4<0A>" *PageRegion A5/A5: "@PJL SET PAPER=A5<0A>" *PageRegion A6/A6: "@PJL SET PAPER=A6<0A>" *PageRegion ISOB5/ISO B5: "@PJL SET PAPER=B5<0A>" *PageRegion EnvC5/C5: "@PJL SET PAPER=C5<0A>" *PageRegion Env10/Com 10: "@PJL SET PAPER=COM10<0A>" *PageRegion EnvDL/DL: "@PJL SET PAPER=DL<0A>" *PageRegion 5x13/Eight Point 5x13: "@PJL SET PAPER=EIGHTPOINT5X13<0A>" *PageRegion EnvC6/Envelope C6: "@PJL SET PAPER=ENVELOPEC6<0A>" *PageRegion Executive/Executive: "@PJL SET PAPER=EXECUTIVE<0A>" *PageRegion B5/JIS B5: "@PJL SET PAPER=JISB5<0A>" *PageRegion B6/JIS B6: "@PJL SET PAPER=JISB6<0A>" *PageRegion Legal/Legal: "@PJL SET PAPER=LEGAL<0A>" *PageRegion EnvMonarch/Monarch: "@PJL SET PAPER=MONARCH<0A>" *PageRegion 69x95mm/16K: "@PJL SET PAPER=SIZE16K195x270<0A>" *PageRegion Statement/Statement: "@PJL SET PAPER=STATEMENT<0A>" *JCLCloseUI: *PageRegion *DefaultImageableArea: Letter *ImageableArea Letter/Letter: "18 36 594 756" *ImageableArea A4/A4: "18 36 577 806" *ImageableArea A5/A5: "18 36 402 559" *ImageableArea A6/A6: "18 36 279 384" *ImageableArea ISOB5/ISO B5: "18 36 480 672" *ImageableArea EnvC5/C5: "18 36 441 613" *ImageableArea Env10/Com 10: "18 36 279 648" *ImageableArea EnvDL/DL: "18 36 293 587" *ImageableArea 5x13/Eight Point 5x13: "18 36 342 900" *ImageableArea EnvC6/Envelope C6: "18 36 305 423" *ImageableArea Executive/Executive: "18 36 504 720" *ImageableArea B5/JIS B5: "18 36 500 691" *ImageableArea B6/JIS B6: "18 36 344 482" *ImageableArea Legal/Legal: "18 36 594 972" *ImageableArea EnvMonarch/Monarch: "18 36 261 504" *ImageableArea 69x95mm/16K: "18 36 177 234" *ImageableArea Statement/Statement: "18 36 378 576" *DefaultPaperDimension: Letter *PaperDimension Letter/Letter: "612 792" *PaperDimension A4/A4: "595 842" *PaperDimension A5/A5: "420 595" *PaperDimension A6/A6: "297 420" *PaperDimension ISOB5/ISO B5: "498 708" *PaperDimension EnvC5/C5: "459 649" *PaperDimension Env10/Com 10: "297 684" *PaperDimension EnvDL/DL: "311 623" *PaperDimension 5x13/Eight Point 5x13: "360 936" *PaperDimension EnvC6/Envelope C6: "323 459" *PaperDimension Executive/Executive: "522 756" *PaperDimension B5/JIS B5: "518 727" *PaperDimension B6/JIS B6: "362 518" *PaperDimension Legal/Legal: "612 1008" *PaperDimension EnvMonarch/Monarch: "279 540" *PaperDimension 69x95mm/16K: "195 270" *PaperDimension Statement/Statement: "396 612" *JCLOpenUI *manualfeed/Manual Feed of Paper: PickOne *OrderDependency: 100 JCLSetup *manualfeed *Defaultmanualfeed: off *manualfeed off/Off: "@PJL SET MANUALFEED=OFF<0A>" *manualfeed on/On: "@PJL SET MANUALFEED=ON<0A>" *JCLCloseUI: *manualfeed *JCLOpenUI *manualduplex/Manual duplex: PickOne *OrderDependency: 100 JCLSetup *manualduplex *Defaultmanualduplex: off *manualduplex off/Off: "@PJL SET MANUALDUPLEX=OFF<0A>" *manualduplex on/On: "@PJL SET MANUALDUPLEX=ON<0A>" *JCLCloseUI: *manualduplex *JCLOpenUI *Duplex/Double-Sided Printing: PickOne *OrderDependency: 100 JCLSetup *Duplex *DefaultDuplex: None *Duplex None/Off: "@PJL SET DUPLEX=OFF<0A>" *Duplex DuplexNoTumble/Long-Edge binding: "@PJL SET DUPLEX=ON<0A>@PJL SET BINDING=LONGEDGE<0A>" *Duplex DuplexTumble/Short-Edge binding: "@PJL SET DUPLEX=ON<0A>@PJL SET BINDING=SHORTEDGE<0A>" *JCLCloseUI: *Duplex *JCLOpenUI *Resolution/Resolution: PickOne *OrderDependency: 100 JCLSetup *Resolution *DefaultResolution: 600dpi *Resolution 300dpi/300 dpi: "@PJL SET RESOLUTION=300<0A>" *Resolution 600dpi/600 dpi: "@PJL SET RESOLUTION=600<0A>" *Resolution 1200dpi/1200 dpi: "@PJL SET RESOLUTION=1200<0A>" *JCLCloseUI: *Resolution *JCLOpenUI *colorbalanceblack/Color balance black: PickOne *OrderDependency: 100 JCLSetup *colorbalanceblack *Defaultcolorbalanceblack: 4 *colorbalanceblack 0/0: "@PJL SET COLORBALANCEBLACK=0<0A>" *colorbalanceblack 1/1: "@PJL SET COLORBALANCEBLACK=1<0A>" *colorbalanceblack 2/2: "@PJL SET COLORBALANCEBLACK=2<0A>" *colorbalanceblack 3/3: "@PJL SET COLORBALANCEBLACK=3<0A>" *colorbalanceblack 4/4: "@PJL SET COLORBALANCEBLACK=4<0A>" *colorbalanceblack 5/5: "@PJL SET COLORBALANCEBLACK=5<0A>" *colorbalanceblack 6/6: "@PJL SET COLORBALANCEBLACK=6<0A>" *colorbalanceblack 7/7: "@PJL SET COLORBALANCEBLACK=7<0A>" *colorbalanceblack 8/8: "@PJL SET COLORBALANCEBLACK=8<0A>" *JCLCloseUI: *colorbalanceblack *CustomJCLcolorbalanceblack True: "@PJL SET COLORBALANCEBLACK=\1<0A>" *ParamCustomJCLcolorbalanceblack colorbalanceblack/colorbalanceblack: 1 int 0 8 *JCLOpenUI *colorbalancecyan/Color balance cyan: PickOne *OrderDependency: 100 JCLSetup *colorbalancecyan *Defaultcolorbalancecyan: 4 *colorbalancecyan 0/0: "@PJL SET COLORBALANCECYAN=0<0A>" *colorbalancecyan 1/1: "@PJL SET COLORBALANCECYAN=1<0A>" *colorbalancecyan 2/2: "@PJL SET COLORBALANCECYAN=2<0A>" *colorbalancecyan 3/3: "@PJL SET COLORBALANCECYAN=3<0A>" *colorbalancecyan 4/4: "@PJL SET COLORBALANCECYAN=4<0A>" *colorbalancecyan 5/5: "@PJL SET COLORBALANCECYAN=5<0A>" *colorbalancecyan 6/6: "@PJL SET COLORBALANCECYAN=6<0A>" *colorbalancecyan 7/7: "@PJL SET COLORBALANCECYAN=7<0A>" *colorbalancecyan 8/8: "@PJL SET COLORBALANCECYAN=8<0A>" *JCLCloseUI: *colorbalancecyan *CustomJCLcolorbalancecyan True: "@PJL SET COLORBALANCECYAN=\1<0A>" *ParamCustomJCLcolorbalancecyan colorbalancecyan/colorbalancecyan: 1 int 0 8 *JCLOpenUI *colorbalancemagenta/Color balance magenta: PickOne *OrderDependency: 100 JCLSetup *colorbalancemagenta *Defaultcolorbalancemagenta: 4 *colorbalancemagenta 0/0: "@PJL SET COLORBALANCEMAGENTA=0<0A>" *colorbalancemagenta 1/1: "@PJL SET COLORBALANCEMAGENTA=1<0A>" *colorbalancemagenta 2/2: "@PJL SET COLORBALANCEMAGENTA=2<0A>" *colorbalancemagenta 3/3: "@PJL SET COLORBALANCEMAGENTA=3<0A>" *colorbalancemagenta 4/4: "@PJL SET COLORBALANCEMAGENTA=4<0A>" *colorbalancemagenta 5/5: "@PJL SET COLORBALANCEMAGENTA=5<0A>" *colorbalancemagenta 6/6: "@PJL SET COLORBALANCEMAGENTA=6<0A>" *colorbalancemagenta 7/7: "@PJL SET COLORBALANCEMAGENTA=7<0A>" *colorbalancemagenta 8/8: "@PJL SET COLORBALANCEMAGENTA=8<0A>" *JCLCloseUI: *colorbalancemagenta *CustomJCLcolorbalancemagenta True: "@PJL SET COLORBALANCEMAGENTA=\1<0A>" *ParamCustomJCLcolorbalancemagenta colorbalancemagenta/colorbalancemagenta: 1 int 0 8 *JCLOpenUI *colorbalanceyellow/Color balance yellow: PickOne *OrderDependency: 100 JCLSetup *colorbalanceyellow *Defaultcolorbalanceyellow: 4 *colorbalanceyellow 0/0: "@PJL SET COLORBALANCEYELLOW=0<0A>" *colorbalanceyellow 1/1: "@PJL SET COLORBALANCEYELLOW=1<0A>" *colorbalanceyellow 2/2: "@PJL SET COLORBALANCEYELLOW=2<0A>" *colorbalanceyellow 3/3: "@PJL SET COLORBALANCEYELLOW=3<0A>" *colorbalanceyellow 4/4: "@PJL SET COLORBALANCEYELLOW=4<0A>" *colorbalanceyellow 5/5: "@PJL SET COLORBALANCEYELLOW=5<0A>" *colorbalanceyellow 6/6: "@PJL SET COLORBALANCEYELLOW=6<0A>" *colorbalanceyellow 7/7: "@PJL SET COLORBALANCEYELLOW=7<0A>" *colorbalanceyellow 8/8: "@PJL SET COLORBALANCEYELLOW=8<0A>" *JCLCloseUI: *colorbalanceyellow *CustomJCLcolorbalanceyellow True: "@PJL SET COLORBALANCEYELLOW=\1<0A>" *ParamCustomJCLcolorbalanceyellow colorbalanceyellow/colorbalanceyellow: 1 int 0 8 *JCLOpenUI *colorsupplyout/On color supply out: PickOne *OrderDependency: 100 JCLSetup *colorsupplyout *Defaultcolorsupplyout: autocontinueblack *colorsupplyout autocontinueblack/Continue in grayscale: "@PJL SET COLORSUPPLYOUT=AUTOCONTINUEBLACK<0A>" *colorsupplyout stop/Stop: "@PJL SET COLORSUPPLYOUT=STOP<0A>" *JCLCloseUI: *colorsupplyout *JCLOpenUI *ret/Resolution Enhancement: PickOne *OrderDependency: 100 JCLSetup *ret *Defaultret: notset *ret dark/Dark: "@PJL SET RET=DARK<0A>" *ret light/Light: "@PJL SET RET=LIGHT<0A>" *ret medium/Medium: "@PJL SET RET=MEDIUM<0A>" *ret notset/notset: "@PJL SET RET=NOTSET<0A>" *ret off/Off: "@PJL SET RET=OFF<0A>" *JCLCloseUI: *ret *JCLOpenUI *borderless/Borderless Printing: PickOne *OrderDependency: 100 JCLSetup *borderless *Defaultborderless: on *borderless off/Off: "@PJL SET BORDERLESS=OFF<0A>" *borderless on/On: "@PJL SET BORDERLESS=ON<0A>" *JCLCloseUI: *borderless *JCLOpenUI *contentorientation/Content Orientation: PickOne *OrderDependency: 100 JCLSetup *contentorientation *Defaultcontentorientation: notspecified *contentorientation landscape/Landscape: "@PJL SET CONTENTORIENTATION=LANDSCAPE<0A>" *contentorientation notspecified/Not specified: "@PJL SET CONTENTORIENTATION=NOTSPECIFIED<0A>" *contentorientation portrait/Portrait: "@PJL SET CONTENTORIENTATION=PORTRAIT<0A>" *contentorientation reverselandscape/Reverse landscape: "@PJL SET CONTENTORIENTATION=REVERSELANDSCAPE<0A>" *contentorientation reverseportrait/Reverse portrait: "@PJL SET CONTENTORIENTATION=REVERSEPORTRAIT<0A>" *JCLCloseUI: *contentorientation *JCLOpenUI *edgecontrol/Edge control: PickOne *OrderDependency: 100 JCLSetup *edgecontrol *Defaultedgecontrol: maximum *edgecontrol normal/Normal: "@PJL SET EDGECONTROL=NORMAL<0A>" *edgecontrol light/Light: "@PJL SET EDGECONTROL=LIGHT<0A>" *edgecontrol maximum/Maximum: "@PJL SET EDGECONTROL=MAXIMUM<0A>" *edgecontrol off/Off: "@PJL SET EDGECONTROL=OFF<0A>" *JCLCloseUI: *edgecontrol *JCLOpenUI *edgetoedge/Edge to edge: PickOne *OrderDependency: 100 JCLSetup *edgetoedge *Defaultedgetoedge: yes *edgetoedge no/No: "@PJL SET EDGETOEDGE=NO<0A>" *edgetoedge yes/Yes: "@PJL SET EDGETOEDGE=YES<0A>" *JCLCloseUI: *edgetoedge *JCLOpenUI *finish/Finisher: PickOne *OrderDependency: 100 JCLSetup *finish *Defaultfinish: none *finish none/None: "@PJL SET FINISH=NONE<0A>" *finish on/On: "@PJL SET FINISH=ON<0A>" *finish staple/Staple: "@PJL SET FINISH=STAPLE<0A>" *JCLCloseUI: *finish *JCLOpenUI *hold/Hold Job: PickOne *OrderDependency: 100 JCLSetup *hold *Defaulthold: off *hold off/Off: "@PJL SET HOLD=OFF<0A>" *hold on/On: "@PJL SET HOLD=ON<0A>" *hold proof/Proof: "@PJL SET HOLD=PROOF<0A>" *hold store/Store: "@PJL SET HOLD=STORE<0A>" *JCLCloseUI: *hold *JCLOpenUI *joboffset/Job Offset: PickOne *OrderDependency: 100 JCLSetup *joboffset *Defaultjoboffset: on *joboffset off/Off: "@PJL SET JOBOFFSET=OFF<0A>" *joboffset on/On: "@PJL SET JOBOFFSET=ON<0A>" *JCLCloseUI: *joboffset *JCLOpenUI *lowsupplies/On low supplies: PickOne *OrderDependency: 100 JCLSetup *lowsupplies *Defaultlowsupplies: continue *lowsupplies continue/Continue: "@PJL SET LOWSUPPLIES=CONTINUE<0A>" *lowsupplies stop/Stop: "@PJL SET LOWSUPPLIES=STOP<0A>" *JCLCloseUI: *lowsupplies *JCLOpenUI *overridea4withletter/Override A4 with Letter: PickOne *OrderDependency: 100 JCLSetup *overridea4withletter *Defaultoverridea4withletter: yes *overridea4withletter no/No: "@PJL SET OVERRIDEA4WITHLETTER=NO<0A>" *overridea4withletter yes/Yes: "@PJL SET OVERRIDEA4WITHLETTER=YES<0A>" *JCLCloseUI: *overridea4withletter *JCLOpenUI *planesinuse/Planes in use: PickOne *OrderDependency: 100 JCLSetup *planesinuse *Defaultplanesinuse: 3 *planesinuse 1/1: "@PJL SET PLANESINUSE=1<0A>" *planesinuse 3/3: "@PJL SET PLANESINUSE=3<0A>" *JCLCloseUI: *planesinuse *JCLOpenUI *printonbackside/Print on back side: PickOne *OrderDependency: 100 JCLSetup *printonbackside *Defaultprintonbackside: on *printonbackside off/Off: "@PJL SET PRINTONBACKSIDE=OFF<0A>" *printonbackside on/On: "@PJL SET PRINTONBACKSIDE=ON<0A>" *JCLCloseUI: *printonbackside *JCLOpenUI *processingaction/Processing Action: PickOne *OrderDependency: 100 JCLSetup *processingaction *Defaultprocessingaction: replace *processingaction append/Append: "@PJL SET PROCESSINGACTION=APPEND<0A>" *processingaction replace/Replace: "@PJL SET PROCESSINGACTION=REPLACE<0A>" *JCLCloseUI: *processingaction *JCLOpenUI *processingboundary/Processing Boundary: PickOne *OrderDependency: 100 JCLSetup *processingboundary *Defaultprocessingboundary: job *processingboundary job/Job: "@PJL SET PROCESSINGBOUNDARY=JOB<0A>" *processingboundary mopy/Mopy: "@PJL SET PROCESSINGBOUNDARY=MOPY<0A>" *JCLCloseUI: *processingboundary *JCLOpenUI *reprint/Reprint job: PickOne *OrderDependency: 100 JCLSetup *reprint *Defaultreprint: auto *reprint auto/Automatic: "@PJL SET REPRINT=AUTO<0A>" *reprint off/Off: "@PJL SET REPRINT=OFF<0A>" *reprint on/On: "@PJL SET REPRINT=ON<0A>" *JCLCloseUI: *reprint *JCLOpenUI *stapleoption/Stapling Mode: PickOne *OrderDependency: 100 JCLSetup *stapleoption *Defaultstapleoption: none *stapleoption default/Default: "@PJL SET STAPLEOPTION=DEFAULT<0A>" *stapleoption custom/Custom Size: "@PJL SET STAPLEOPTION=CUSTOM<0A>" *stapleoption five/5: "@PJL SET STAPLEOPTION=FIVE<0A>" *stapleoption four/4: "@PJL SET STAPLEOPTION=FOUR<0A>" *stapleoption none/None: "@PJL SET STAPLEOPTION=NONE<0A>" *stapleoption one/1: "@PJL SET STAPLEOPTION=ONE<0A>" *stapleoption oneangled/One Angled: "@PJL SET STAPLEOPTION=ONEANGLED<0A>" *stapleoption oneopposed/One Opposed: "@PJL SET STAPLEOPTION=ONEOPPOSED<0A>" *stapleoption option3/Option 3: "@PJL SET STAPLEOPTION=OPTION3<0A>" *stapleoption option4/Option 4: "@PJL SET STAPLEOPTION=OPTION4<0A>" *stapleoption option5/Option 5: "@PJL SET STAPLEOPTION=OPTION5<0A>" *stapleoption option6/Option 6: "@PJL SET STAPLEOPTION=OPTION6<0A>" *stapleoption seven/7: "@PJL SET STAPLEOPTION=SEVEN<0A>" *stapleoption six/6: "@PJL SET STAPLEOPTION=SIX<0A>" *stapleoption three/3: "@PJL SET STAPLEOPTION=THREE<0A>" *stapleoption two/2: "@PJL SET STAPLEOPTION=TWO<0A>" *JCLCloseUI: *stapleoption *CloseGroup: General *% Generic boilerplate PPD stuff as standard PostScript fonts and so on *DefaultFont: Courier *Font AvantGarde-Book: Standard "(001.006S)" Standard ROM *Font AvantGarde-BookOblique: Standard "(001.006S)" Standard ROM *Font AvantGarde-Demi: Standard "(001.007S)" Standard ROM *Font AvantGarde-DemiOblique: Standard "(001.007S)" Standard ROM *Font Bookman-Demi: Standard "(001.004S)" Standard ROM *Font Bookman-DemiItalic: Standard "(001.004S)" Standard ROM *Font Bookman-Light: Standard "(001.004S)" Standard ROM *Font Bookman-LightItalic: Standard "(001.004S)" Standard ROM *Font Courier: Standard "(002.004S)" Standard ROM *Font Courier-Bold: Standard "(002.004S)" Standard ROM *Font Courier-BoldOblique: Standard "(002.004S)" Standard ROM *Font Courier-Oblique: Standard "(002.004S)" Standard ROM *Font Helvetica: Standard "(001.006S)" Standard ROM *Font Helvetica-Bold: Standard "(001.007S)" Standard ROM *Font Helvetica-BoldOblique: Standard "(001.007S)" Standard ROM *Font Helvetica-Narrow: Standard "(001.006S)" Standard ROM *Font Helvetica-Narrow-Bold: Standard "(001.007S)" Standard ROM *Font Helvetica-Narrow-BoldOblique: Standard "(001.007S)" Standard ROM *Font Helvetica-Narrow-Oblique: Standard "(001.006S)" Standard ROM *Font Helvetica-Oblique: Standard "(001.006S)" Standard ROM *Font NewCenturySchlbk-Bold: Standard "(001.009S)" Standard ROM *Font NewCenturySchlbk-BoldItalic: Standard "(001.007S)" Standard ROM *Font NewCenturySchlbk-Italic: Standard "(001.006S)" Standard ROM *Font NewCenturySchlbk-Roman: Standard "(001.007S)" Standard ROM *Font Palatino-Bold: Standard "(001.005S)" Standard ROM *Font Palatino-BoldItalic: Standard "(001.005S)" Standard ROM *Font Palatino-Italic: Standard "(001.005S)" Standard ROM *Font Palatino-Roman: Standard "(001.005S)" Standard ROM *Font Symbol: Special "(001.007S)" Special ROM *Font Times-Bold: Standard "(001.007S)" Standard ROM *Font Times-BoldItalic: Standard "(001.009S)" Standard ROM *Font Times-Italic: Standard "(001.007S)" Standard ROM *Font Times-Roman: Standard "(001.007S)" Standard ROM *Font ZapfChancery-MediumItalic: Standard "(001.007S)" Standard ROM *Font ZapfDingbats: Special "(001.004S)" Standard ROM

Save